UPSONIC POWER - POWER +
Parallel Redundant UPS System
Modular and Upgradeable- 10kVA to 100kVA
- Can Be Expanded
Increased reliability, and protection is provided by passive redundancy
- System can be Expanded
As demand for load increases add more UPS 10 kVA modules
- Truly Uninterruptible Power
Load constantly supplied from battery regardless of input power conditions
- Clean Environment
System operates on continuous current mode (CCM) reducing line interference (RFI/EMI)
- Power Controller
With internal communications card for management by Ethernet software
- Savings on Electricity Usage
Output efficiency of 96% means lower cost and lower heat dissipation
- Comprehensive Warranties
Full 2 year replacement warranty on UPS and 2 years on batteries
- Space Saver
It's revolutionary design with small footprint saves space. Even when you upgrade you stack upwards, not sideways
Click Power + for specifications.
The POWER + is a parallel redundant UPS comprising from 1
to 10 UPS modules each of 10KVA, a system controller, centralized
static switch module and distribution block. It can be configured as
a 3/3, 3/1 or a 1/1 system.
The POWER + gives you maximum flexibility - it can be extended as the load increases, by simply sliding in more modules.
The POWER + is truly modular - upgradeable from 1 to 10 modules, each of 10kVA, allowing you to assemble a UPS system of up to 100kVA
The POWER + is designed according to IEC- 62040- 3 standard: "The Inverter always supplies the power to the load and it takes its power from either the a.c. input via the rectifier or from the battery. The rectifier has to be controlled so as to recharge and maintain the battery in a charged condition". In other words, the battery is connected between inverter output and rectifier input on common DC link.
The POWER + is based on green power technology. The system has a unity input power factor (0.99) and a very low input THD. It operates in Continuous Current Mode (CCM), reducing line interferences (RFI / EMI).In short - clean environment!
The POWER + system has active current sharing at the input / output and battery. In short - higher reliability!
The POWER + has an output efficiency of up to 96%,and 98% efficiency during back up mode. In short - savings on electricity!
Light & Compact Only 9Kg per UPS module! The POWER + light weight and small dimensions allow for easy maintenance, reduced shipping costs and smaller foot print.
The POWER + gives you maximum flexibility - it can be extended as the load increases, by simply sliding in more modules.
The POWER + is truly modular - upgradeable from 1 to 10 modules, each of 10kVA, allowing you to assemble a UPS system of up to 100kVA
The POWER + is designed according to IEC- 62040- 3 standard: "The Inverter always supplies the power to the load and it takes its power from either the a.c. input via the rectifier or from the battery. The rectifier has to be controlled so as to recharge and maintain the battery in a charged condition". In other words, the battery is connected between inverter output and rectifier input on common DC link.
The POWER + is based on green power technology. The system has a unity input power factor (0.99) and a very low input THD. It operates in Continuous Current Mode (CCM), reducing line interferences (RFI / EMI).In short - clean environment!
The POWER + system has active current sharing at the input / output and battery. In short - higher reliability!
The POWER + has an output efficiency of up to 96%,and 98% efficiency during back up mode. In short - savings on electricity!
Light & Compact Only 9Kg per UPS module! The POWER + light weight and small dimensions allow for easy maintenance, reduced shipping costs and smaller foot print.